About Vivant Alternate Loose Leaf Vaporizer
Vivant is a great brand that delivers an alternate vaporizer. It's a great tool for those that want alternative smoking and it does work really well all the time. It even has a stellar design, temperature control and convection heating too.
Size: 32.0mm x 52.0mm x108.0mm
Best temperature: 180°C/356°F (max 220°C/428°F)
Battery: discharging current > 30A 18650 battery, not included
Vivant Alternate Loose Leaf Vaporizer contains
- 1x Alternate
- 1x Stainless Steel Concentrate Pad
- 1x Brush
- 1x USB Cable
- 1x User Manual
- 1x Grinder Tool
- 1x Seal Ring (Top Cap)
- 2x Seal Ring (Airflow Director)
- 2x Stainless Steel Mesh (Mesh Number: 200)
- 2x Stainless Steel Mesh (Mesh Number: 50)
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
- It doesn't come with dry herb, you shall buy it separately.
- No 18650 battery included. We suggest you use discharge current no less than 30A battery, for example, Sony VTC 4.
- You can download the certificates.
Full convection hot air system
High efficiency heat exchanger
Removable and rechargeable 18650 battery (not included)
Super precise temperature control
Automatic off feature
Airflow control with reverse flow protection
How to use:
1. Screw off the top cap and install a 18650 battery in proper position;
2. You can charge the device with a 1A charger via micro USB port;
3. Grind herbs using provided tool;
4. Screw on the filling device and remove the packing tool. Push ground material into the hole with the tool;
5. Screw on the top cap and choose desired temperature by using the up/down buttons on the bottom;
6. Press the on/off button for 2 seconds until the unit beeps and the screen reads heat;
7. The red light will turn green and the screen will read ready when the unit has reached desired temperature. The unit will beep 3 times;
8. Breath in through the mouthpiece with a slow and steady draw;
9. The unit will auto shutoff after 60 seconds of non use. Press the on/off button 5 times rapidly to turn on it.
How to clean:
1. Ensure the unit is powered off and battery is removed;
2. Remover airflow assembly. You can use a coin to unscrew the airflow director;
3. Pull the lower portion of the assembly with a small tool to expose the internal portion;
4. Remove the airflow valve;
5. Use a solution of 1 part water 1 part isopropyl alcohol and the provided brush. Rinse and clean all pieces until all residue is removed. Allow parts to sit out and dry completely before reassembling the unit;
6. Assemble the unit and enjoy your Alternate.
Airflow adjustment: Raise or push the airflow adjuster to control the amount of air;
Buzzer adjustment: In power-off state, long press the on/off button and up button to enter adjustment interface. Press two regulatory buttons to adjust buzzer volume from 1 to 5. You can press the on/off button to confirm. You may switch the unit to silent mode by setting the volume to 1.
Stealth function: When the device is on, press fire button and down button simultaneously to switch between stealth on and stealth off.
Key lock function: In power-on state, long press the two regulatory buttons for 2 seconds to switch between Lock and Unlock.
USB port function: The usb port can be used for charging and updating firmware.
Switch the display mode: In power-off state, long press the two regulatory buttons and the screen display will rotate 180 degrees.
Shift between °C and °F: If you raise the temperature to 220°C and continue to press the up button, the temperature will turn to the lowest 158°F. Equally, the temperature will turn to 428°F if the temperature decrease below 70°C.
Countdown reset: During the 60 seconds countdown period after heating, you can press the two regulatory buttons simultaneously to restart the countdown process.
2 Years for Alternate Body. Please check Guarantee Policy.
Cheapest Vape Products For Sale & Buy